iSys iTerra Elite Quick Start Manual page 54

Smearing:
•
Consumables not installed correctly or non-iSys brand.
•
Paper moisture content is too high. Check for pock
marking.
•
Paper width not within specification.
•
Paper not tracking properly through the feeder
•
Exit Speed too slow.
_________________________________________________________________________________________________________________________
PAGE 54 --- iTerra Elite Quick Start Guide
Creasing or Wrinkling:
•
Consumables not installed correctly or non-iSys brand.
•
Paper moisture content is too high. Check for pock
marking.
•
Paper width not within specification.
•
Paper not loading square to the front feed roller in the
printer.
© 2008 iSys-The Imaging Systems Group Inc.