Cycle Options - Roper Automatic washers Use And Care Manual

Selecting a cycle, time, and temperature
Use the information in this section to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
•
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
•
Page 13 describes what happens during a
wash cycle.
Normal cycle
The Normal cycle features hot and warm
water, high agitation, and longer spin
speeds to shorten drying time. Select 10 or
14 minutes of wash time, depending on
whether your wash load is lightly or moder-
ately soiled.
Knits/Gentle cycle
The Knits/Gentle cycle features a brief soak
and reduced agitation speed for gentle soil
removal. Low spin speeds reduce wrinkling.
Use this cycle for cleaning delicate items
and washable knits.
Permanent Press cycle
The Permanent Press cycle features a cool-
down rinse, and low spin speeds to reduce
wrinkling. Use this cycle for cleaning perma-
nent press and some synthetic fabrics.
NORMAL
COLD
6
REGULAR 10
WARM
HEAVY
14
HOT
OFF
SPIN
RINSE
KNITS / GENTLE 4
6
COLD
8
WARM
HOT
PULL START PUSH STOP
Water temperature selector in Cycle Control Knob
O PERATIN G YO UR WAS HE R
RINSE
SPIN
OFF
10
HOT
8
WARM
PERMANENT
4
COLD
PAUSE
RINSE
OFF SPIN
4 CYCLE 2 SPEED

Cycle options

You may select a different wash time by first
selecting the water temperature (Warm or
Cold) and then turning to the new wash
time. For example, for 14 minutes of wash
time with Cold water:
1. Push in the Cycle Control Knob and turn
it clockwise to Cold.
2. Pull out the Cycle Control Knob and allow
your washer to fill.
3. When your washer has filled, push in and
turn the Cycle Control Knob to Heavy, 14
minutes of wash time.
4. Pull out the Cycle Control Knob.
PRESS
11