Advertisement
Windows 2000
FireWire Controller:
1. When the installation of the device is finished, the driver will be automatically
installed after you restart the computer. To make sure the PCI Express card
works proper, install the driver as follows.
2. Open the folder: "1394B\setup_xp1", click on "ok".
3. Choose "Yes, I want to restart my computer now." and click on "Close".
4. After restart you need to install the USB 2.0 Controller.
USB 2.0 Controller:
1. Open the folder: "USB\USB2.0-Nec\Windows\setup".
2. The driver will be installed.
3. You can now start to use the device.
Support Delock
If you have further questions, please contact our customer support
support@delock.de / www.delock.de or phone
0700 - DELOCKGE (0700 - 335 625 43).
You can contact our service hotline during the following times:
Mon - Fry: 9:00 - 17:30 pm charge 0,12 € / min*
* A connection fee applies according to fee schedule of Deutsche Telekom AG or
your local telephone provider.
All callers outside of Germany dial please 00493081789324
You can find current product information on our homepage: www.delock.de
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user's manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically,
without explicit written approval of Delock.
Edition: 02/2006
-3-
Advertisement
