System password protection
Before you can set up the system password protection, you must have assigned the
i
supervisor password in the BIOS Setup Utility (see the section "Setting a supervisor
password ").
Activating system protection
►
Enter the BIOS Setup Utility and go to the Security menu.
►
Select the Password on Boot option and press the Enter key.
►
Select Enabled and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup Utility.
►
Select the Save Changes and Exit option under Exit.
Your notebook will now restart and you are asked to enter your password.
Deactivating system protection
►
Enter the BIOS Setup Utility and go to the Security menu.
►
Select the Password on Boot option and press the Enter key.
►
Select Disabled and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup Utility.
►
Select the Save Changes and Exit option under Exit.
The notebook reboots and there is no longer any password protection for the system.
10600605407, edition 1
Security functions
49