Password protection for starting the operating system
With the supervisor password or the user password, you have assigned in the BIOS Setup
i
(see section "Set the supervisor and user password"), you can also prevent booting of the
operating system.
Activating system protection
►
Call BIOS Setup and select the Security menu.
►
If you have not assigned BIOS passwords yet, define the supervisor and the user password
now, if desired (see "Set the supervisor and user password" section).
►
Mark the Password on Boot field and press the Enter key.
►
Select the Every Boot entry and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup .
►
Select the Exit Saving Changes option in the Exit menu.
The notebook reboots and you are asked to enter your password (the supervisor or user password).
Deactivating system protection
►
Call BIOS Setup and select the Security menu.
►
Mark the Password on Boot field and press the Enter key.
►
Select Disabled and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup .
►
Select the Exit Saving Changes option in the Exit menu.
The notebook reboots and there is no longer any password protection for the operating system.
A26391-K149-Z120-1-7619, Edition 2
Security functions
49