Removing And Installing Sata Hard Disk - Fujitsu Siemens Computers AMILO A Series Easy Manual

Removing and installing components when performing service
Mounting the cover
► Place the cover on its mounting location (1).
► Fasten the cover with the screw (2).
► Replace the battery (see "Inserting battery ").
► Turn the notebook over and place it on a flat surface.
► Reconnect the cables that you disconnected before.

Removing and installing SATA hard disk

If you are asked by the Hotline/Help Desk to remove and install the SATA hard disk yourself,
proceed as follows:
► Switch the notebook off and pull the power plug out of the mains socket.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stabile, sturdy, flat surface. If necessary, lay an anti-
slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see "Removing battery").
Removing cover
► Remove the screw (1).
► Pull the cover (2) off the notebook.
58
2
1
1
2
10600605407, edition 1