Table of Contents
Advertisement
Security functions
Password protection of operating system
With the supervisor password or the user password, you have assigned in the BIOS Setup
i
Utility (see "Setting supervisor and user password" section), you can also prevent booting
of the operating system.
Activating system protection
►
Enter the BIOS Setup Utility and go to the Security menu.
►
Select the Password on Boot option and press the Enter key.
►
Select Enabled and press the Enter key.
►
Select the Save Changes and Exit option under Exit.
Your notebook will now restart and you are asked to enter your password (the supervisor password).
Deactivating system protection
►
Enter the BIOS Setup Utility and go to the Security menu.
►
Select the Password on Boot option and press the Enter key.
►
Select Disabled and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup Utility.
►
Select the Save Changes and Exit option under Exit.
The notebook reboots and there is no longer any password protection for the system.
52
Downloaded from LpManual.com Manuals
10600690747, edition 1
Advertisement
Table of Contents
