Operational Panel; Turning The Power On; Selecting A Source - Clarion NX502A Quick Start Manual

Operational Panel

[ ALL ] ALL MENU
[MIC]
RESET
[ ] NAVI/AV
[POWER/VOL]
SD Card Slot
Dummy SD card
already inserted in
this unit for prevent
misinsertion of micro
SD card.
AUX Jack
Please remove the
Micro SD card slot
dummy SD card before
Only navigation map card is available and don't
inserting SD card. .
remove it when unit is power on.
[POWER/VOL] Knob
• Press to power on the system when ignition on.
• When power on, short press to mute the volume.
• Rotate the knob to increase or decrease the volume.
• Press and hold this key more than 1 second to turn off the system.
[ ALL ] ALL MENU Button
• Short press to show/exit shortcut menu.
• Long press to show/exit main source menu.
[ ] NAVI/AV Button
• Press to enter navigation mode;
• Press again to return current source.
[ ] EJECT Button
• Press to eject disc.
[ MIC ] Hole
• Internal microphone
[RESET] Button
• Press to load original settings.
N ote: When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored
in memory are cleared.
[ ] EJECT
Disc Slot

Turning the Power On

Start the engine. The power is supplied to
this unit.
Press [POWER/VOL] button on the panel to
turn on the unit.

Selecting a Source

Long press [ ALL ] button on the PANEL to show main source menu.
Touch [ - ] on the bottom of screen to show front zone sources.
Change page by dragging left or right or touching other [ - ] buttons.
Touch the icons on the screen to enter corresponding work mode, such as Disc mode, Tuner
mode, Telephone mode, etc.
NX502A 3