Connecting A Component Video Source - Epson EX7200 User Manual

Connecting a Component Video Source

If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a
component-to-VGA video cable from Epson (see page 18) or an
electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the Y/
Cb/Cr (or Y/Pb/Pr) connectors on your device.
2. Connect the other end of the cable (HD15 male) to the
Computer (Component Video)
optional component-to-VGA video cable or adapter.
VS200/EX3200
EX5200/EX7200
3. You may need to change the
projector's Signal menu to
port on your projector using an
Computer (Component
Video) port
Computer (Component
Video) port
Input Signal
setting in the
Auto (see page 72).
Setting Up the Projector 39