Selecting An Image Source; Adjusting The Image - Epson EX7200 User Manual

50 Displaying and Adjusting the Image

Selecting an Image Source

You may need to select the image source if you have multiple image
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.
If you don't see the image you want, press the
on the remote control or the projector until you see the image you
want to project. Or, press one of the Source buttons on the remote
control ( Computer , Video
If you still can't see an image or can't project the same image that is on
your notebook or computer screen, see page 97 for solutions.
Select USB to project from a USB device (EX5200/EX7200 only).
See page 63 for instructions.

Adjusting the Image

Once you see your image, you may need to make certain adjustments:
If the image is too high or too low, reposition it as described
I
below.
If the image isn't square, see page 51.
I
To focus or zoom your image, see page 53.
I
To quickly adjust the color, brightness, or contrast, see page 54.
I
To change the image aspect ratio, see page 55.
I
If you need to fine-tune the image and/or sound, see Chapter 4.
I
Source Search
, or USB ).
Source Search button
Source
buttons
button