Subscribe to Our Youtube Channel
Related Manuals for Crunch Ground Pounder GP10D2
Summary of Contents for Crunch Ground Pounder GP10D2
- Page 1 WOOFER SERIES WOOFER SERIES Hifonics, ™ Crunch, ™ & Maxxsonics™ are part of the Maxxsonics USA, Inc. family. www.maxxsonics.com 847-540-7700 GP10D2 / GP10D4 / GP12D2 / GP12D4 / GP15D2 Owners / Installation Manual...
- Page 2 Ground Pounder will work in big ported as well. Ground Pounder proves that once and for all Crunch USA you can “Feel the Power”. Just one look and you can see quality, mechanical ability and sheer ground pounding beauty.
- Page 3 CABINET MATERIAL: Generally 5/8” to 3/4” material should be used on all enclosures. The following is a list of As the manufacturer of Maxxsonics, Crunch and Hifonics car audio products, commonly used construction materials. Maxxsonics USA Inc. warrants to the original purchasing consumer the - Baltic Birch Plywood / Marine or Exterior Rated, 13 to 19-ply min.
-
Page 4: Troubleshooting
SUBWOOFER SPECIFICATIONS TROUBLESHOOTING: ELECTRICAL GROUND POUNDER Basic Problem Possible Solution Specifications Measurement GP10D2 GP10D4 GP12D2 GP12D4 GP15D2 No Sound from Speaker Confirm power is on from all components. NomZ Ohms 2 + 2 4 + 4 2 + 2 4 + 4 2 + 2 0.0327... -
Page 5: Glossary Of Terms
LED CONNECT: GLOSSARY OF TERMS: 1. Connect the LED (+) spade terminal to an accessory switched +12 volt wire. This The system losses of relative damping (ratio of stored to dissipated wire should have +12 volts when the ignition key is “on” and 0 volts when the ignition energy or ratio of reative to resistive energy.
Need help?
Do you have a question about the Ground Pounder GP10D2 and is the answer not in the manual?
Questions and answers