Other Main Functions; Selecting The Level Meter; Selecting The External Component - JVC KD-SX50M Instruction Manual

Selecting the level meter

You can select the level display according to your
preference.
When shipped from the factory, "AUDIO 2" is
selected.
1
Press and hold SEL (select) for more
than 2 seconds.
"CLOCK H," "CLOCK M,"
"LEVEL," or "EXT IN"*
appears on the display.
* Displayed only when FM,
AM, or CD is selected as the
source.
2
Select "LEVEL" if not shown on the
display.
3
Select the desired mode.
• AUDIO 1: Shows the audio level indicator.
• AUDIO 2: Alternates "AUDIO 1" setting
and illumination display.
• OFF: Erases the audio level indicator.
4
Finish the setting.

OTHER MAIN FUNCTIONS

Selecting the external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component to use—CD changer or external
component.
When shipped from the factory, "CHANGER" is
selected.
1
2
3
4
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
Press and hold SEL (select) for more
than 2 seconds.
"CLOCK H," "CLOCK M,"
"LEVEL," or "EXT IN"*
appears on the display.
* Displayed only when FM,
AM, or CD is selected as the
source.
Select "EXT IN" if not shown on the
display.
Select the desired mode.
• CHANGER: To use the CD changer.
• LINE IN: To use the external component
other than CD changer.
Finish the setting.
15