Canon PowerShot SX600 HS User Manual page 26

z z If [Raise the flash] appears on the screen,
move the <h> switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shoot.
z z Press the shutter button all the way
down.
z z As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
z z Keep the camera still until the shutter
sound ends.
z z After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
z z
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
Elapsed Time
z z Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
z z Frames displayed around any detected
faces indicate that they are in focus.
z z Once recording begins, take your finger
off the movie button.
Resize the subject and
recompose the shot as needed.
z z To resize the subject, repeat the
operations in step 3 (= 25).
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
z z When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
z z Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
z z
Recording will stop automatically when
the memory card becomes full.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
26