Shooting With The Fe Lock - Canon PowerShot SX600 HS User Manual

• In [Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (= 63).
• In [Z] mode, even after the flash fires, ensure that the main subject
does not move until the shutter sound is finished playing.
[!] Off
For shooting without the flash.
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.

Shooting with the FE Lock

Just as with the AE lock (= 53), you can lock the exposure for the flash
shots.
1
Raise the flash and set it to [h]
(=
2
Lock the flash exposure.
z z Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
z z The flash fires, and when [(] is
displayed, the flash output level is
retained.
z z To unlock FE, release the shutter button
and press the <o> button again. In this
case, [(] is no longer displayed.
3
Compose the shot and shoot.
•
FE: Flash Exposure
Still Images
61).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
62