Red-Eye Correction
Red-eye that occurs in flash photography can be automatically corrected as
follows.
1
Access the [Flash Settings]
screen.
z
z
Press the <n> button, choose [Flash
Settings] on the [4] tab, and then press
the <m> button
2
Configure the setting.
z
z
Choose [Red-Eye Corr.], and then
choose [On]
z
z
Once the setting is complete, [R] is
displayed.
z
z
To restore the original setting, repeat this
process but choose [Off].
•
Red-eye correction may be applied to image areas other than eyes
(if the camera misinterprets red eye makeup as red pupils, for
example).
•
You can also correct existing images
•
You can also access the screen in step 2 when the flash is up by pressing the
<r> button and immediately pressing the <n> button.
Still Images
(=
21).
(=
21).
(=
82).
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see "Recording Time per Memory Card"
z
z
Press the <m> button, choose [
the menu, and choose the desired option
(=
z
z
The option you configured is now
displayed.
z
z
To restore the original setting, repeat this
process but choose [
Image
Resolution
Frame Rate
Quality
1920 x 1080
30 fps
1280 x 720
30 fps
640 x 480
30 fps
•
In [
] and [
] modes, black bars displayed on the top and bottom edges of
the screen indicate image areas not recorded.
Movies
(=
156).
] in
20).
].
Details
For shooting in Full HD
For shooting in HD
For shooting in standard
definition
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
35