Passwords - GE StoreSafe Pro User Manual

1.3 Passwords

Passwords are provided to limit access to menus and certain functions. Two levels of password
security are provided:
•
Operator: Limited menu access, only the Operator menu is available.
•
Installer: Complete menu access, both the Main and Operator menus are available.
As a security measure, it is recommended that the Operator and Installer passwords be changed after
installation is complete (see section 3.19). Store the passwords in the administrator's secure files.
Default Passwords
Four-Channel Units
Password Access
Type Level
Operator
Operator
Installer
Installer
Factory
Installer
Defaults
Language
Installer
Ethernet
Access
Installer
Reset
Ten and Sixteen-Channel Units
Password Access
Type Level
Operator
Operator
Installer
Installer
Factory
Installer
Defaults
Language
Installer
Ethernet
Access
Installer
Reset
0150-0295A
Function
Provides access to the Operator
and SystemView menus.
Provides access to all on-screen
menus.
Resets the multiplexer to the
factory defaults (except the time,
date, email addresses, and email
IP address).
Provides access to the On-screen
Language menu.
Deactivates the ethernet
password, so that the unit may be
accessed by any PC equipped with
WaveReader.
Function
Provides access to the Operator
and SystemView menus.
Provides access to all on-screen
menus.
Resets the multiplexer to the
factory defaults (except the time,
date, email addresses, and email
IP address).
Provides access to the On-screen
Language menu.
Deactivates the ethernet
password, so that the unit may be
accessed by any PC equipped with
WaveReader.
7
Changeable Default
by user? Password
Press 'ENTER'
Yes
4 Times
3 4 4 4
Yes
4 1 1 1
No
1 4 1 4
No
1 1 1 1
No
Changeable Default
by user? Password
Press 'ENTER'
Yes
4 Times
3 4 7 7
Yes
8 1 1 1
No
5 4 1 5
No
1 1 1 1
No
GE Security DVMRe StoreSafe Pro