Camera Setup - GE StoreSafe Pro User Manual

Pressing the Function button will bring up the Help screen shown below. This screen will overlay the
current video image.
{F}
Function
Button
This Help Screen will display for 15 seconds, and then disappear. Press the Function
NOTE
button again to redisplay.
Sensitivity Scope
Use the sensitivity scope to adjust the motion detection sensitivity for the scene. The
sensitivity scope is the bar located near the left-hand corner of the screen.
The black bar raises and lowers to indicate the degree of motion detected. When the
black bar reaches the red bar, a motion detection alarm is activated.
Adjusting Motion Detection Sensitivity: Raise and lower the red bar to change the
motion detection sensitivity. Use the Play Forward button to increase the sensitivity level
and the Play Reverse button to decrease the sensitivity level. The sensitivity level is also
displayed as a numeric value.
Play Reverse to decrease the Sensitivity
Main Menu → Motion Detection → Indicate Detection
q
Motion Detection may be indicated on-screen by displaying the letter M.
Use this menu to turn this feature On or Off.

3.13 Camera Setup

Use this menu to:
•
Edit the title for each camera.
•
Adjust the Automatic Gain Control.
•
Disable or Enable camera inputs.
•
Specify cameras as covert (recorded but not displayed).
•
View the Camera Scope (Histogram)
0150-0295A
'MENU' : Exit Activity Setup
'ENTER': Save and Exit Activity Setup
'PAUSE': Toggle between Enable and Neutral
'STOP' : Toggle between Disable and Neutral
'ZOOM' : Disable/Enable all zones
'PLAY FORWARD': Increase the Sensitivity level
"PLAY REVERSE': Decrease the Sensitivity level
Play Forward to increase the Sensitivity
48
Indicate Detection
Detection
Camera Titles
Camera AGC
Camera Disable
Covert Camera
Camera Scope
GE Security DVMRe StoreSafe Pro
ON