Record - GE StoreSafe Pro User Manual

Main Menu → Time/Date → Network Time Setup
q
Use this menu to enable/disable and specify how often time synchronization should occur between
StoreSafe Pro and the Network Server. The Region /Time Zone must be setup prior to enabling the
option.
Update Interval, Select from: Enable, Disable, Once per Day, Twice per Day, and Once per Hour
NTP Primary Server: Enter IP Address of Primary Server.
NTP Backup Server: Enter IP Address of Backup Server.
1. To save changes and exit the menu: Select [OK], then press the Enter button.
2. To exit the menu without making changes: Press the Menu button, or select [CANCEL], and then
press the Enter button.
Last Update: Never Since Power-up
Warning: Region/Time Zone must be set correctly!

3.9 Record

Use this menu to:
•
Specify a schedule for recording.
•
Specify the record quality: High, Medium, or Standard.
•
Specify if a camera is to be used for event recording,
time-lapse recording, or both.
•
Specify the time-lapse record rate per camera.
•
Specify the event record rate per camera.
•
Specify the activity record rate per camera.
•
Specify the alarm record rate.
•
Setup the Alarm/Event actions.
•
Perform disk maintenance by performing a Disk Test,
Deleting, Un-deleting, or Destroying previously recorded
video.
•
Set the Record Lock feature.
•
Set the Auto Delete Mode.
0150-0295A
Network Time Protocol Setup
Update Interval
NTP Primary Server
NTP Backup Server
[CANCEL]
: DISABLE
: 3. 37. 8. 26
: 0. 0. 0.
[OK]
Record Timer
Record Quality
Event/Timelapse
Timelapse Record Rate
Event Record Rate
Activity Record Rate
Alarm Record Rate
Alarm/Event Actions
Disk Maintenance
Record Lock
Auto Delete Mode
33 GE Security DVMRe StoreSafe Pro
0