GE StoreSafe Pro User Manual page 43

Main Menu → Alarms → Notification
q
Use this menu to select Email Alarm Notification.
Email Notification Setup
This screen allows the user to setup the types of events to be notified of, and the email addresses (up
to three) to be notified. Follow the context sensitive on-screen instructions to setup the individual fields.
Also, please note that the Region/Time Zone setting must be set correctly for Email notification to time
stamp messages accurately. If the Notify Alarm or Notify Record fields are enabled you will be notified
of the results of the Disk Test.
One or more of these
fields must be set to
ENABLE to receive an
email notification of
the selected event.
Email Address Format
The format of the email addresses should be entered as follows. If the email address to be notified is
john.doe@somecompany.com, then john.doe should be entered in one of the Email User fields and
somecompany.com should be entered in the subsequent Email Domain field.
Main Menu → Alarms → Archive Alarms
q
Selecting Enable from this menu will cause the unit to activate
Relay 2 if a malfunction occurs while archiving.
0150-0295A
Notify Vidloss: ENABLE
Notify Record: DISABLE
Notify Menu Access: DISABLE
Notify Connection: DISABLE
Email User 1: john.doe
Email Domain 1: somecompany.com
Email User 2: jane.doe
Email Domain 2: somecompany.com
Local User: jim.doe
Local Domain: somecompany.com
SMTP Server: 0.
Format of email address: user@domain
Warning: Region/Time Zone must be set correctly!
43
Email Notification Setup
Notify Alarm:
Notify Archive:
Notify Power Up
SMTP Port:
0. 0. 0
[CANCEL] [OK]
GE Security DVMRe StoreSafe Pro
Email
DISABLE
DISABLE
DISABLE
25
Archive Alarm
Relay 2
ENABLE