Disk Analysis Screen; Quick Archive To Cd - GE StoreSafe Pro User Manual

5.1 Disk Analysis Screen

Begin by pressing the Search button. The Disk Analysis Screen will appear.
This screen shows a graphical representation of the recorded video stored on the
internal hard disk.
Arrow Cursors
Disk Analysis Screen
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Alarm Event
Hit SEARCH again to enter Advanced Search
Rotating the Jog moves the two arrow cursors across the representation of the recorded video. As the
cursors move across the screen the corresponding disk time is indicated in the upper right of the screen.
The video representations are color-coded by category. Rotating the Shuttle expands (Zooms) the
display. The Lowest level (most detail) is indicated on screen with an (L). Pressing the Enter button will
start Playback from the cursor location.

5.2 Quick Archive to CD

Archive to CD on the Disk Analysis Screen by selecting the time and date and pressing the Record
CD button. The QuickWave Setup must be set to ON from the Main Menu → Quick Wave Setup
menu (see section 3.15). The Archive Incident menu should appear.
8. Use the Jog to modify the time parameters and use the
Shuttle to move between the Start and Stop fields.
9. Press the Record button on the front panel when satisfied.
10. The CD Writer will open the CD tray when completed.
The video may now be viewed on any PC equipped with a CD-ROM.
0150-0295A
Activity Videoloss
61
02/28/2002 20:45:00
01/21/2002 20:17:01 01/21/2002 20:17:01
CD Button
Present Absent
Level 1 Level 1
GE Security DVMRe StoreSafe Pro
Search Button
Disk Time
and Date
at cursor
location.
Record
Write to CD
Zoom
Level
Archive Incident
07/31/2003 02:20:06P
Start Stop
02:02:51P 02:20:09P
Capacity: 557MB
'RECORD' to Archive