Machine does not feed fabric
A. The stitch length dial set on 0; adjust 1
-
5.
B. The feed dog is lowered, raise by turning
the feed dog dial to the straight stitch
symbol.
C. The feed dog teeth are clogged with lint.
D. Using improper sewing foot.
E. Pressure on the presser foot released or
too loose.
Machine does not sew the stitch indicated
A. Controls have incorrect setting; refer to
operating manual for correct stitch setting.
Machine runs sluggishly
A. The feed dog teeth are clogged with lint.
B. Dirt or lint in the sewing hook or the
bobbincase.
C. The outlet voltage is too low.
D. Drive-belt too tight or too loose.
E. Oiling required.
Machine will not run
A. Hand wheel release not tightened.
B. Bobbinwinder is engaged.
C. Machine not plugged into electrical
out let.
52