Selecting The Stitch - Viking Turissa Operating & Service Manual

14
Selecting the stitch
As you face the machine you wifl see two round
controls. The one towards the top of
the
machine is the Stitch Program Selector.
The outer scale is for selecting the needle
position, the zigzag width and for making
buttonholes.
The middle scale is used for selecting various
patterns.
The inner scale is used for selecting various
reverse cycle stitches.
The red window indicates which function the
machine is going to perform.
The middle and inside scales are changed by
moving the handle. The outside scale is moved
by turning the outside scale.
Remember to always turn the dial clockwise.
The other control on the right of the machine
is the Stitch Length Dial, the reverse cycle
control and the control for sewing in reverse.