Motorola DCT2500 Installation Manual page 42

A-12 Diagnostics
The Current Channel Status fields are:
Field Description
Type Indicates whether the current channel is analog or digital*
Status Indicates the channel type*
Connected Indicates whether the set-top is connected*
Preview Indicates whether the program is in the free preview state: YES or NO.
Purchasable Indicates whether the current or next program can be purchased: YES or NO.
Purchased Indicates whether the current or next program has been bought: YES or NO.
CH Indicates the channel currently tuned when the OSD appeared.
Tuned The actual programmed tuner frequency (Carrier Definition Frequency + 1.75 MHz).
Frequency
The EPOCH Number and Type, Authorization, Service Status, and ID are for Motorola use only.
* The variables aaa, bb, ccccc, and ddd are:
aaa For analog, it is blank. For digital, aaa can be:
ENC − encrypted
!
UNE − unencrypted
!
The current epoch authorization reason in the current_epoch_auth_reason field (hexadecimal):
bb
00 missing program re-key
01 missing working key epoch message
02 missing event blackout message
03 missing category rekey
04 old category sequence in program, rekey message
10 program bought
11 program bought without taping
12 subscribed with taping
13 subscribed without taping
14 subscribed with taping purchasable
15 IPPV with taping
16 IPPV without taping
20 bad seed checksum
21 bad debit buffer checksum
30 IPPV not enabled
31 insufficient credit to purchase
32 show count limit exceeded
33 debit register will overflow
34 no AFP records available
36 maximum package cost exceeded
37 no IPPV overlay in message
40 not subscribed
41 regional blackout
42 event blackout
INIT − Initialized state
ccccc
CONFI − Configured
ACQUI − Acquiring the program
AUTH − Authorized for the program
Not A − Not authorized for the program
blank − Connected
ddd
NOT − Not connected
DCT2500 Installation Manual