Section; Operational Check - Motorola DCT2500 Installation Manual

Operational Check

The operational check tests the communication link between the remote control and the
DCT2500 to verify the DCT2500 response to remote control commands:
Table 3-1
Operational check procedures
Feature
Power on
Channel Selection
Volume Control
If the DCT2500 does not operate properly, refer to Section 5, "Troubleshooting."
Testing Procedure
!
Press to turn on the DCT2500.
POWER
!
Turn the TV on and tune it to the DCT2500 output channel 3 or 4.
!
Scan through the channels using the
the + - keys on the remote control.
CHANNEL
!
Tune to several channels by entering the channel number with the numeric keys
on the remote control.
!
Use the TV volume control to adjust the sound volume to a moderate level.
!
Press + - on the remote control to increase the volume to its upper limit,
VOLUME
lowest level, and to a comfortable level.
!
Press to turn the sound completely off. Press
MUTE
sound.
Installation
56 keys on the DCT2500 and
CHANNEL
again to restore the
MUTE
DCT2500 Installation Manual
3-13