Honeywell Thor VM2 Quick Start Manual page 2

Vehicle mount computer

Hide thumbs Also See for Thor VM2:

Table of Contents

Setting up the Thor VM2

Please have the following Information available before

setting up your Thor VM2:

Network ID (SSID) of the Access Point

WEP key or LEAP authentication credentials

1. Connect the Thor VM2 to an external power

source.

2. Press the Power button.

3. It may be desirable to attach a USB keyboard

during the setup process.

4. Accept the EULA.

5. Calibrate the touch screen.

6. Set the date and time.

7. Edit the radio parameters.

8. Edit the RFTerm Terminal Emulation

parameters (optional).

9. Perform a reboot.

Table of Contents