Honeywell Thor VM2 Quick Start Manual page 4

Vehicle mount computer

Hide thumbs Also See for Thor VM2:

Table of Contents

ActiveSync using USB-Client Connection

The only connection type is USB Client.

1. Connect the Thor VM2 end of the USB cable to

the USB port on the back of the Thor VM2 Quick

Mount Smart Dock.

2. Connect the USB type A connector on the I/O

cable to a USB port on a PC or laptop.

ActiveSync starts automatically when the USB cable is

connected.

When the Thor VM2 loses connection (e.g., enters

Suspend Mode), the connection to ActiveSync will be

temporarily lost. When the Thor VM2 resumes, the

ActiveSync session will automatically re-connect.

Please refer to the Thor VM2 Reference Guide for

ActiveSync information.

Table of Contents