Features: Pc Settings, Input Selection - Toshiba 20VL64 series Owner's Manual

20VL64-en.book Page 19 Thursday, February 1, 2007 5:06 PM

Features: PC Settings, Input Selection

Using the PC settings
You can adjust the horizontal/vertical picture
position, frequency (to minimize vertical stripes
on the screen), and phase (to remove horizontal
noise and sharpen the picture) manually or auto-
configure these settings all at once.
1. Confirm a PC is connected (see
"Connecting a personal computer (PC)" on
page 12).
2. Repeatedly press
or on the TV side panel to select PC input
mode.
3. Press MENU, and then press
PC menu appears.
4. To automatically adjust the settings, press
to highlight Auto and then press OK. The
TV will automatically adjust the screen
position, frequency, and phase. Allow a
few seconds while auto-configuration is in
progress.
PC
Auto
Frequency
Phase
H. Position
V. Position
MENU OK EXIT
5. To manually make the appropriate
adjustments to other items, press
highlight the item to be set and then press
/ to make adjustment.
• Frequency
Minimizes any vertical bars or stripes
appearing on the screen background. The
adjustable range may vary depending on
the input mode.
• Phase
Reduces (or minimizes) any horizontal noise
and clears up or sharpens the character
images. The adjustable range may vary
depending on the input mode.
• H. Position/V. Position
Adjusts picture left/right and up/down. The
adjustable range may vary depending on
the input mode.
Selecting an input signal
If you would like to view image coming from
another device connecting to your TV, repeatedly
press
the remote control or the right side panel of the
TV.
on the remote control
A selection menu displays on screen after the first
button press.
/ until the
Note: When an S-Video signal is input to EXT2,
EXT2-S will be automatically sensed. EXT2-S will
be displayed on the input menu instead of EXT2.
Make sure the equipment you want to view is
correctly connecting to the TV. See
external equipment" on page 10
32
In addition to accepting signals from external
32
devices, the TV can meanwhile output signal to
other external devices via
Selected input
mode
to
TV
EXT1
EXT2/EXT2-S
EXT3
EXT3-S
PC
e.g. When you want to view an image coming
from
connected to an external device and select EXT1
as the input mode. You can connect another
equipment to
the image in CVBS format via a SCART lead.
To exit this menu, press EXIT or OK, or just wait for
a few seconds to let the menu disappear.
ENGLISH-19-
to select your desired input signal on
TV
EXT1
EXT2
EXT3
EXT3-S
PC
for details.
SCART 1) or
(
SCART 2).
(
Using input Available output
connector connector(s):
Output signal
(Video)
(S-Video)
or
PC
, make sure the connector is correctly
for recording or displaying
Input
selection
"Connecting
: Tuner,
: Tuner
: CVBS
: Tuner
: Tuner,
: Video
: Tuner,
: Tuner
: Tuner,
: Tuner