Connecting External Equipment; Connecting A Media Recorder And/Or A Decoder - Toshiba 20VL64 series Owner's Manual

20VL64-en.book Page 10 Thursday, February 1, 2007 5:06 PM

Connecting external equipment

You can connect a wide range of audio and video equipment to your TV. Before connecting any
external equipment, turn off all main power switches. If there is no switch, remove the mains plug from
the wall socket.
Please refer to the owner's manual of the equipment to be connected.

Connecting a media recorder and/or a decoder

This connection allows you to watch and record basic and premium cable channels, as well as watch
or record videotapes/DVDs. Tune the VCR to an appropriate channel (the same channel as the
decoder output switch), and use the decoder to change channels.
Connect the aerial to the socket on the rear of the TV. If you are using a decoder* and/or media
recorder**, it is essential that the aerial cable is connected through the decoder and/or through the
media recorder to the TV.
Switch on the decoder/media recorder and the TV. Press on the remote control to select EXT1 to
watch TV and record the TV. Press on the remote control to select EXT2 to watch videotapes/DVDs
and record the TV. See "Selecting an input signal" on page 19 for more information.
decoder*
media recorder**
*A decoder could be Digital Satellite, Free to Air or any other compatible decoder.
** A media recorder could be VCR (video recorder) or DVD recorder.
ENGLISH-10-