Panasonic Diga DMR-BCT820 Operating Instructions Manual page 17

If the TV does not have the HDMI terminal
Connect the TV with the 21-pin Scart cable or the
Audio/Video cable. (
To connect and register the USB HDD
(optional)
Refer to "Registering the external HDD
(USB HDD)". ( 80)
To connect the Communication Camera
(optional)
Refer to "VIERA Connect (Enjoying Internet
Service)". ( 77)
About HDMI cable
• Use the High Speed HDMI cables.
Non-HDMI-compliant cables cannot be utilized.
• When outputting 1080p signal, please use
HDMI Cables 5.0 meters or less.
• Recommended Panasonic HDMI cable part
number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[approx. 0.2 W ("Power Save in Standby" is
activated and "RF OUT ( CATV Signal )" is
set to "Off")]
• The HDMI connection supports VIERA Link "HDAVI
Control" ( 82).
However, to perform PAUSE LIVE TV (
Recording ( 82) for broadcasts that cannot be received by
this unit, you need to connect a 21-pin Scart cable. (
• You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
• If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
19)
30) and Direct TV
Connect the Set Top Box or video equipment
Set Top Box or video equipment
A 21-pin Adaptor is required for
§
AUDIO/VIDEO terminal.
19)
Getting started
AV1
( )
TV
VIDEO
RGB/S VIDEO
AV2
( EXT )
VIDEO
S VIDEO
21-pin Scart cable
§
AV
VQT4G51
17