Ci Module - Panasonic Diga DMR-BCT820 Operating Instructions Manual

Getting started

CI module

An appropriate CI module is required to view or record the encrypted broadcast.
You need a CI module, CAM (Conditional Access Module) together with a certified Smart Card, and a
subscription with the corresponding broadcaster.
• If not viewing/recording an encrypted broadcast, you do not need to insert the CI module.
1
Insert the certified Smart Card into the CAM (both optional).
CAM
2
Insert the CI module into the CI (Common Interface) slot of this unit.
This unit
TV service encryption is automatically cancelled and the service can be viewed or recorded. (The
recording might be prohibited by broadcasters.)
• Depending on the CI module, a PIN may be demanded. If prompted to enter a PIN code, enter the set
PIN code with the number buttons.
Notes for recording of an encrypted broadcast (
• You can insert one or two different CAMs with Smart Cards into this unit.
• Be sure to insert the CI module horizontally into the slot.
• Insert the CAM and the Smart Card with the correct direction.
• When removing the CI module, press the CI module eject button and pull it straight out.
• For more details, see the manual of the CAM and Smart Card, or consult the dealer.
• The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
• Turn off the unit before you insert or remove the CI module.
14
VQT4G51
Smart Card
CI module
CI (Common Interface) slot
33)
CI module