Sound Adjustments; Selecting Preset Sound Modes; (C-Eq: Custom Equalizer); Adjusting The Sound - JVC KD-S12 Instructions Manual

Sound adjustments

Selecting preset sound modes

(C-EQ: custom equalizer)

You can select a preset sound mode suitable to
the music genre.
~
Indication
USER (Flat sound)
ROCK Rock or disco
music
CLASSIC Classical
music
POPS Light music
HIP HOP Funk or rap
music
JAZZ Jazz music
* 1 BAS: Bass; *
* 3 LOUD: Loudness

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
12
Preset values
For:
BAS * TRE *
1
00 00
+03 +01
+01 –02
+04 +01
+02 00
+02 +03
2 TRE: Treble;
2
BAS*
4 (bass)
Adjust the bass.
TRE*
4 (treble)
Adjust the treble.
FAD*
5 (fader)
Adjust the front and rear
LOUD *
2 3
speaker balance.
OFF
BAL (balance)
ON
Adjust the left and right
speaker balance.
OFF
LOUD*
4 (loudness)
Boost low and high
frequencies to produce a
OFF
well-balanced sound at low
ON
volume level.
VOL*
6 (volume)
OFF
Adjust the volume.
4
* When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including "USER."
* 5 If you are using a two-speaker system, set
the fader level to "00."
6
* Normally the +/– buttons work as the volume
control. So you do not have to select "VOL"
to adjust the volume level.
7
* Depending on the amplifier gain control
setting. (See page 13 for details.)
Indication pattern changes as
you adjust the level.
Ex.: When "TRE" is selected
Indication
–06 (min.) to
+06 (max.)
–06 (min.) to
+06 (max.)
R06 (Rear only)
to
F06 (Front only)
L06 (Left only)
to
R06 (Right only)
LOUD ON
LOUD OFF
00 (min.) to
30 or 50 (max.)*
Range
J
7