Table of Contents
Advertisement
Motor Speed
Power rating
Blade
Fence Adjustments
Preset Depth Stops
Power Cord
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
1.
.
Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry location to
4.
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool. It will do the job better and more safely at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
Use the right tool for the job. Do not attempt to force a small tool or attachment to
6.
do the work of a larger industrial tool. Do not use a tool for a purpose for which it was
not intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
7.
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
SKU 38437
Specifications
10,000 RPM (no load)
10 VAC at 60 Hz, single phase, 6 A
4 inch diameter
Max depth: 1-1/8 inches;
Max. angle: 45 degrees
0, 10, and 0
18 AWG, 3-prong plug
Save This Manual
Safety Warnings and Precautions
Page
REV 07h
Hide quick links:
Advertisement
Table of Contents
