Table of Contents
Advertisement
3
DISP
4
5
6
Repeat steps 3 to 5 until you finish inputting the name.
7
To erase the input characters
Insert spaces using the same procedure described above.
Notes:
• When you assign a name to the 41st disc, "NAME FULL" appears on the display. (In this case,
delete unwanted names before assignment.)
• When the CD changer is connected, you can assign names to CDs in the CD changer. These names
can also be shown on the display if you insert the CDs in this unit.
40
Select the character set you want while " "
is flashing.
Each time you press the button, the character set changes
as follows:
Capital letters
Numbers and symbols
Select a character.
About the available characters, see page 41.
Move the cursor to the next (or previous)
character position.
Press the button while the last selected
character is flashing.
The input name is stored in memory.
Small letters
Advertisement
Table of Contents
