Assigning Names To The Sources - JVC KD-MX2900R Instructions Manual

Assigning names to the sources

You can assign names to CDs and the external component connected to the LINE IN plugs.
After assigning a name, it will appear on the display when you select the source.
CD* and CD changer*
External component
2, 7
1
Select a source you want to assign a name to.
2
DISP
When you select the CD as
the source:
Note:
You cannot assign a name to an MD.
Sources
2, 3
4
5
Press and hold SEL (select) for more than 2
seconds while pressing DISP.
Maximum number of the characters
up to 32 characters (up to 40 discs)
up to 12 characters
* You cannot assign a name to a CD Text.
When you select the external component
connected to LINE IN as the source:
To be continued on the next page
39