Tape; Playing A Tape - Sony LBT-ZUX10D Operating Instructions Manual

Tape

Playing a tape

You can use TYPE I (normal) tape.
1
Select a tape deck.
Press FUNCTION +/– repeatedly (or
press TAPE A or TAPE B on the unit)
to select "TAPE A" or "TAPE B".
2
Insert a tape.
Press A Z PUSH OPEN/CLOSE or
B PUSH Z OPEN/CLOSE on the unit
to open the selected deck.
Insert a tape
into the deck
with the side
you want to
play back or
record facing
upward.
Press A Z PUSH OPEN/CLOSE or
B PUSH Z OPEN/CLOSE on the unit
again to close the selected deck.
3
Press DIRECTION on the unit
repeatedly to select "g" to play
back one side, "j"
back both sides or "RELAY"
(Relay Play) to play back both
decks in succession.
4
5
Other operations
To
Stop playback
Pause playback Press X. Press X again to
Rewind or
fast-forward
1)
to play
2)
Remove a tape
Note
You cannot open the tape deck during playback,
fast-forward or rewind operation.
Tip
If you press
the TAPE A function is selected and there is no
tape in Deck A, the system automatically
switches to the TAPE B function when there is
a tape in Deck B and vice versa. Then, playback
will start.
H
Press (or nN on the unit).
The tape starts playing.
H
Press (or nN on the unit) again
to play back the reverse side.
Front side
indicator
1)
The playback stops automatically after
repeating the sequence five times.
2)
Relay Play follows this cyclic sequence up
to five times, then stops:
Deck A (front side) t Deck A (reverse
side) t Deck B (front side) t Deck B
(reverse side)
Press VOLUME +/– (or turn
MASTER VOLUME on the unit) to
adjust the volume.
Do this
Press x.
resume playback.
Press m or M (or
m or M
unit). To return to normal
playback, press
(or nN on the unit).
Push A Z PUSH OPEN/
CLOSE or
OPEN/CLOSE on the unit
when playback is stopped.
H
(or nN on the unit) when
Reverse side
indicator
on the
H
B Z
PUSH
55 GB