Sony LBT-ZUX10D Operating Instructions Manual page 64

2
Press BEAT PATTERN +/–
repeatedly (or hold down BEAT
PATTERN and turn OPERATION
DIAL on the unit) to select the
beat pattern you want.
3
Press BPM CONTROL on the
unit once to start the tempo
input.
4
By following the tempo of the
music, press BPM CONTROL 4
times to input the tempo.
Each time you press BPM CONTROL,
the flashing box will be replaced with
a "B".
The BPM (Beat Per Minute) value
appears in the display.
To change the beat pattern
Press BEAT PATTERN +/– repeatedly
(or hold down BEAT PATTERN and turn
OPERATION DIAL on the unit) to select
the beat pattern you want.
The name of the beat pattern appears in
the display.
To change the beat speed
Press BEAT SPEED +/– repeatedly (or
hold down BEAT SPEED and turn
OPERATION DIAL on the unit) to select
the speed you want (BPM 40 – 200).
To return the beat speed to default
setting (BPM 120)
Press ENTER and BEAT SPEED on the
unit at the same time.
64 GB
Notes
• The beat tempo input is canceled if you press
any buttons other than BPM CONTROL or
you connect or disconnect the microphones or
headphones.
• If you input the tempo less than BPM 40,
"Hit Faster" appears in the display. Hit again
in faster tempo.
• If you input the tempo more than BPM 200,
"Hit Slower" appears in the display. Hit again
in slower tempo.
• If the tempo of the beat pattern does not match
the tempo of the music, change the speed
manually after you input the tempo.
• The BEAT BLEND and BEAT PATTERN
turns off automatically when you
– press SOUND FIELD.
– turn on the test tone.
• You cannot turn on BEAT BLEND and
BEAT PATTERN when test tone is
performed.
Tips
• You can use the drum pads and the beat
function at the same time.
• You can record the sound of the drum pad or
beat pattern onto a tape.