Sony LBT-ZUX10D Operating Instructions Manual page 10

1 "/1 (on/standby) (pages 18, 19,
20, 54, 77, 78, 84)
Press to turn the system on or off.
B BEAM MODE (page 71)
Press to change the lighting effect of
a beam.
C DVD (pages 19, 27, 56, 65, 71,
82)
TUNER/BAND (pages 53, 71)
TAPE A (pages 55, 71)
Press to select a function.
D FLANGER (pages 60, 79, 84)
DELAY (pages 60, 79, 84)
CHORUS (pages 61, 79, 84)
AQUA (pages 61, 79, 84)
Press to select an effector mode.
E Display (pages 13, 72, 85)
F IR Receptor (page 79)
G TV/SAT (pages 71, 76, 79)
VIDEO (pages 71, 77)
TAPE B (pages 55, 69, 71)
Press to select a function.
H DISPLAY (pages 71, 72)
Press to change the information in
the front panel display.
I GROOVE (page 58)
Press to reinforce the bass.
J FLAT (page 58)
MP3 EQ (page 58)
REGGAE (page 58)
HIP HOP (page 58)
TECHNO (page 58)
Press to select a preset effect.
K SOUND FIELD (page 59)
Press to select a sound field.
L FRONT BEAM (right) (pages 71,
79)
10 GB
M MIC 1/2 LEVEL (pages 57, 65,
78)
Turn to adjust the microphone
volume.
ECHO LEVEL (page 65)
Turn to adjust the microphone echo
effect.
N MIC 1/2 (jack) (pages 57, 65, 78)
Connect the microphones.
O BOTTOM BEAM (right) (page 71)
P Disc tray (pages 13, 27, 80)
Q OPERATION DIAL (pages 58,
63, 70)
Turn to select a setting.
R MASTER VOLUME (pages 27,
69, 78)
Turn to adjust the volume.
S Power illuminator (page 70)
T BOTTOM BEAM (left) (page 71)
U VIDEO INPUT (jacks) (page 75)
Connect an audio or video
component.
V PHONES (jack) (page 78)
Connect the headphones.
W FRONT BEAM (left) (pages 71,
79)
X EQ BAND/MEMORY (page 58)
Press to select a frequency band
when adjusting the graphic
equalizer.
Y ROCK (page 58)
POP (page 58)
JAZZ (page 58)
DANCE (page 58)
Press to select a preset effect.
USER EQ (page 58)
Press to select a user equalizer.