Table of Contents
Advertisement
4
Special Features
PAGING Indicator
(TONE)
(FLASH/CALL\WAIT)
(REDIAL/PAUSE/PROGRAM)
4-A For Call Waiting Service Users
(FLASH/CALL–WAIT)
Press
if you hear a call-waiting tone while talking.
≥The first call is put on hold and you can answer the second call.
≥To return to the first caller, press
≥The call waiting service cannot be used when a parallel connected
telephone is in use.
≥If this function does not operate properly, consult your telephone company
for details.
4-B Automatic Security Code Setting
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help prevent
the unauthorized use of your telephone line by another cordless telephone
user.
4-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
(TONE)
Press
before entering access numbers which require tone dialing.
≥The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up,
the mode will return to pulse.
≥Access numbers entered after pressing
redialing.
IN USE/CHARGE/HOLD
Indicator
(HANDSET–LOCATOR)
(FLASH/CALL–WAIT)
again.
(TONE)
will not be included when
4-D How to Use the PAUSE Button
(For Analogue PBX Line/Long Distance Service Users)
(REDIAL/PAUSE/PROGRAM)
We recommend that you press
required for dialing with a PBX or to access a long distance service.
(9)
e.g. Line access number
(PBX)
¤
(9)
(REDIAL/PAUSE/PROGRAM)
(REDIAL/PAUSE/PROGRAM)
≥Pressing
This prevents misdialing when you redial or dial a stored number.
(REDIAL/PAUSE/PROGRAM)
≥Pressing
of the pause between numbers.
4-E Handset Locator
You can locate the handset or page the handset user with beep tones.
(HANDSET\LOCATOR)
1
Press
≥The PAGING indicator on the handset and the
IN USE/CHARGE/HOLD indicator on the base unit flash and the
handset beeps for 1 minute.
(HANDSET\LOCATOR)
2
To stop paging, press
(OFF)
(–––)
press
and
on the handset.
4-F FLASH Button
(FLASH/CALL–WAIT)
Pressing
allows you to use special features of your
host PBX such as transferring an extension call or accessing special
telephone services (optional), such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: "90, 100, 110, 250, 300, 400, 600, 700 ms
(milliseconds)", using the handset near the base unit. Your phone comes
from the factory set to "700 ms".
The TALK indicator light must be off before programming.
(REDIAL/PAUSE/PROGRAM)
Press
¤ AUTO
¤
(fl)
(FLASH/CALL–WAIT)
≥If 3 beeps sound during programming, the handset is too far from the
base unit. Move closer to the base unit or place the handset on the base
unit. Start again from the beginning.
≥If the unit is connected via a PBX, PBX functions (transferring a call etc.)
might not work correctly. Consult your PBX installer for the correct setting.
Section 4
if a pause is
¤
Phone number
once creates a 3.5 second pause.
more than once increases the length
on the base unit.
again or
¤
¤
(1)
(8)
Dialing button (
to
)
(1): 90 ms
(2): 100 ms (3): 110 ms
(4): 250 ms (5): 300 ms (6): 400 ms
(7): 600 ms (8): 700 ms
.
Advertisement
Table of Contents
