General Settings - Psm; Basic Procedure - JVC KD-G814 Instructions Manual

Cd receiver
Table of Contents

Advertisement

General settings — PSM

Basic procedure

You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Ex.: When "DIMMER MODE" is selected
Indications
DEMO MODE
Display
demonstration
CLOCK HOUR
Hour adjustment
CLOCK MINUTE
Minute adjustment
CLOCK DISP
Clock display
LEVELMETER
Audio/volume
level meter
20
Selectable settings, [reference page]
DEMO ON
: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [8].
DEMO OFF
: Cancels.
1 – 12, [8]
[Initial: 1 (1:00)]
00 – 59, [8]
[Initial: 00 (1:00)]
CLK DISP ON : [Initial]; Clock display is shown on the lower part of
the display.
CLK DISP OFF : Current source indication (ex. station band, disc
number, etc.) is shown on the lower part of the display.
• Press DISP repeatedly to show the other information for about
5 seconds.
LEVEL 1[Initial]/LEVEL 2: Display the audio level meter with different
illumination pattern.
EQ & LEVEL
: Display the equalizer pattern and the audio level
meter.
SILENT
: Display the equalizer pattern and volume level meter.
3
Adjust the PSM item selected.
4
2
Repeat steps
and
other PSM items if necessary.
5
Finish the procedure.
3
to adjust the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd-g814au

Table of Contents