Pentax WG-3 GPS Operating Manual page 84

5
Take the second frame.
Move the camera so that the semi-
transparent image and the actual view
overlap and press the shutter release
button.
6
Take the third frame.
Repeat steps 4 to 5 to take the third frame.
The images are joined together and a panorama image appears.
The panorama image does not appear when [Instant Review] (p.102) is set to
3
[Off].
• The images cannot be stitched if moving objects, repeating patterns, or
nothing exists in the preview guide area for overlapping the first and second
images, or the second and third images.
• When the Face Detection function is activated (p.100), it works only when
taking the first shot.
To Cancel after Taking the First or Second Frame
1
After shooting the first frame in step 5 or the second frame in
step 6 on p.82, press the 4 button or the four-way controller
(3).
A confirmation dialog appears.
2
Use the four-way controller (23) to select an option and
press the 4 button.
Save
Discard Discards the captured image(s) and you can retake the first frame.
Cancel
Unstitched images shot in F mode are fixed at h.
82
Saves the captured image(s) and you can retake the first frame.
When this option is selected after shooting the second frame, the first
and the second frames are stitched together and saved as a
panoramic photograph.
Returns to the previous shooting screen.
1 2
SHUTTER SHUTTER SHUTTER 2nd Frame 2nd Frame 2nd Frame
Exit Exit Exit
OK OK OK