Getting Started; Remote Control, Inserting Batteries; Turning On The Power; Selecting A Color System For Your Tv - ELECTROCOMPANIET EMP Owner's Manual

Getting Started

8. Remote Control, Inserting batteries

1 Open the battery compartment
2 Insert two type R06 or AA batteries,
following the indications (+/-) inside
the compartment.
3 Close the cover.

9. Turning on the Power

1 Connect the AC power cord to an AC
outlet.
2 Turn on your TV and AV receiver.
3 Select the appropriate input source
at the AV receiver that was used to
connect to chis player. Refer to the
owner's manual for your component
for details.
4 Turn on this player.
5 Set the TV to the correct Video IN
channel. (e.g. EXT1, EXT2, AV1,
AVZ AUDIO/VIDEO, ecc. Refer
to the owner's manual for your TV for
details.)
• The front display lights up and the
default screen appears on the TV.

10. Selecting a color system for your TV

This player it compatible with both NTSC and
PAL video formats. Select the color system
that matches your TV.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
BLACK LEVEL
CLOSED CAPTION
PICYURE SETTING
ADV PICTURE
1 Press SETUP
2 Press ► repeatedly to select [VIDEO
SETUP PAGE].
3 Press ▲▼ to highlight [TVTYPE],
then press ►
9
PAL
NTSC
MULTI