About Wi-Fi Connections
Connect the device to an access point or directly to a computer according to the network environment.
Network modes
Depending on the device that will be connected to the scanner via Wi-Fi, you can change the network mode of the scanner as follows.
Network mode
Description
The scanner operates without another wireless access point. A 1-to-1 connection can be established between the
AP mode
scanner and the computer.
The scanner operates as a wireless device. In this mode, a separate wireless access point device is necessary for the
Station mode
scanner to connect to the computer.
Connection Metshod
1-to-1 connection (AP mode connection)
Search for the device and connect to it using
your computer's wireless connections feature.
See "Connecting using the AP Mode" (p. 10)
IMPORTANT
• The scanner can be shared with multiple computers on the same network via the access point, although only one can connect to the scanner
at a time.
• When using a Wi-Fi connection, scanning is slower than with the USB connection.
Connecting via a wireless access point (station mode connection)
Using WPS
WPS-equipped
access point
If the wireless access point is WPS-
compatible, connection to the device can be
made using the WPS feature.
See "Connecting using WPS" (p. 14)
Setting manually
If the wireless access point is not WPS-
compatible, make the device's network
settings manually as required by your network
configuration.
See "Connecting by Manual Setting" (p. 18)
9