Connecting Using The Ap Mode - Canon WU10 User Manual

Connecting using the AP Mode

To connect one-to-one with a wireless LAN-equipped computer, set this device to the AP mode. The AP mode is the factory-default setting for this
device, so unless the mode has been changed, use the following procedure to search and connect to the computer.
1
Check the SSID of this device.
The SSID is printed on the device's bottom label.
SSID: WU10-XXXXXXX
10
2
Slide the mode switch to the "AP" side, press the
power button to turn the device on.
Power button