Listening To The Usb Device - JVC GET0699-001A Instructions Manual

Changing the display information
Disc title/Album name/performer (folder
name)* = Track title (file name)* = Current
track number with the elapsed playing time
= Current track number with the clock
time = (back to the beginning)
* If the current disc is an audio CD, "NO NAME"
appears.
If an MP3/WMA file does not have Tag information
or <TAG DISPLAY> is set to <TAG OFF> (
folder name and file name appear.

Listening to the USB device

This unit can play MP3/WMA files stored on a USB mass storage class device.
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player,
etc. to the unit.
• You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations,
20 – 21.
~
] Turn on the power.
Caution on volume setting:
USB devices produce very little noise compared
with other sources. Lower the volume before
playing a USB to avoid damaging the speakers
by sudden increase of the output level.
If you have turned off the power (without
detaching the USB device)...
Pressing / SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
10 ENGLISH
Using the remote controller
25),
Ÿ
USB input jack
All tracks will be played repeatedly until you change the
source or detach the USB device.
Stop playing and detaching the
USB device
Straightly pull it out from the unit.
"NO USB" appears. Press / SOURCE to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc. (
5 U / D ∞ : Selects folder of the
MP3/WMA
2 R / F 3 : Selects track
2 R / F 3
: Fast-forwards or
[Hold]
reverses the track
USB memory
9)