Monitor Power Buttons - NVision TIRE PRESSURE MONITORING SYSTEM Owner's Manual

MONITOR POWER BUTTONS

There are two buttons on the monitor face
(See Illustration C).
Off/On Button:
When the monitor is plugged into a 12 volt DC power source, pushing this button will
power on or power off the monitor. For best results, we recommend that you always leave your monitor
on. This provides a continuous monitoring connection with your tire sensors. If you are just powering up
the monitor, it may take a couple of minutes for the connection between the sensors and monitor to
be reacquired.
Mute Button:
This button allows you to mute and unmute the warning signal. Should a pressure
warning notification be sent, the corresponding lights and signal will sound. Pressing the mute button
silences the warning tone.
Illustration C: Monitor Face Buttons
Off/On Mute
8