NVision TIRE PRESSURE MONITORING SYSTEM Owner's Manual page 24

Can I replace the sensor batteries?
Your sensors have been designed to withstand extreme conditions for temperature, vibration and moisture
infiltration. To ensure that the pressure sensors have the highest reliability, the sensor housing is permanently
sealed. Batteries cannot be replaced. When your sensors expire, simply purchase a new nVISION TPMS sensor
replacement.
Can I store my vehicle with the monitor on?
Yes. And we recommend that you do. The monitor draws a modest 25mA of power. That's minimal for normal
driving situations. If storing for more than 1 month, it's advisable to unplug the monitor and remove all sensors
(see "Tips" section, page 18). Plug in monitor and replace sensors before driving again.
Can monitor be used independently on front/back tow-vehicle?
Yes. The monitor is intended to be transferable to any vehicle.
Why doesn't my monitor turn on?
Make sure the lighter receptacle has power. Some vehicles only have power when the vehicle is running. Check that
the power cord is plugged in securely to the receptacle on the monitor. If the cigarette receptacle is always "hot",
be sure all connections are secure.
A red LED light on the power cord plug is lit when cord is powered. Check fuse located in the lighter plug-in end of
the cord by unscrewing the black ring at the silver tip of the plug. Replace only with a 1 Amp fast-blow fuse. Check
the vehicle fuse controlling the power source.
If I unplug or lose power, must I reprogram the monitor?
No. Saved memory position settings are retained. Monitor will display 3 dashes (- - -) until sensors send a new
updated reading within its normal 5-minute reporting period.
24