Initial Setup - NVision TIRE PRESSURE MONITORING SYSTEM Owner's Manual

INITIAL SET UP
We have designed this TPMS system to be easy as 1-2-3 to set up and use everyday. Your nVISION TPMS is
completely wireless, no tools are required for installation.
Before you power up your TPMS system for the first time, you will need to install the antenna (See Illustration F).
You will find an antenna port in the back of the monitor. Screw the antenna into the port. Be careful not to over-
tighten the antenna.
Illustration F: Installing Antenna
Step 1
Your nVISION tire sensors have been designed to accommodate tires from 10 PSI to 150 PSI. They work by
establishing a baseline pressure level for each tire during the initial installation process. All future tire pressure
readings will be compared to this baseline level.
Note: It is critical that you make sure that the tire pressures are at the proper level before installing
your sensors. For best results, we recommend that you install your TPMS system in the morning, before
the tires have been moved or driven. We refer to these tires as "cool", and they provide the best
reference for baseline pressures.
12