Samsung Xpress M207x series User Manual page 179

Fax menu
5
Receiving setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 29).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.
• Or press Setup > Machine Setup > Default Setting > Fax Default.
Item
Receive Mode Selects the default fax receiving mode.
Specifies the number of times the machine rings before
Ring To Answer
answering an incoming call.
Automatically prints the page number, and the date
Stamp RCV Name and time of reception at the bottom of each page of a
received fax.
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
Rcv Start Code machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Description
Item
Automatically reduces an incoming fax page to fit the
Auto Reduction
size of the paper loaded in the machine.
Discards a specific length from the end of the received
Discard Size
fax.
Blocks any unwanted faxes that you stored in the
Junk Fax Setup memory as junk fax numbers. This setting may not be
available depending on your country.
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
DRPD Mode
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 238).
Description
193
3. Useful Setting Menus