Samsung Xpress M207x series User Manual page 181

Xpress m207 series multifunction printer
Hide thumbs Also See for Xpress M207x series:
Table of Contents

Advertisement

System setup
Item
Sets the length of time the printer waits before printing
Job Timeout
the last page of a print job that does not end with a
command to print the page.
You can set the condition to wake up from power-save
mode. Set the item on.
• Button Press: When you press any button except
power button, the machine wake up from the power
save mode.
Wakeup Event
• Scanner: When you insert paper in the document
feeder, the machine wake up from the power save
mode.
• Printer: When you open or close the paper tray, the
machine wake up from the power save mode.
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• Off: If a paper mismatch occurs, the machine waits
Auto Continue
until you insert the correct paper.
• On: If a paper mismatch occurs, an error message will
display. The machine waits for about 30 second, then
automatically clear the message and continue
printing.
• Altitude Adj.
Optimize print quality according to the machine's
altitude.
• Altitude
Adjustment
Description
Item
Allows you to append the required carriage return to
Auto CR
each line feed, which is useful for DOS users.
Firmware Version
Shows the product's firmware version.
Provides suggestions while you type an email address or
AutoComplete
fax number. This enables you to find and select the data
without typing it in completely.
• Tray Chaining
Determine whether or not the machine continues
printing when it detects the paper does not match. For
• Auto Tray Switch
example, if both tray 1 and tray 2 are filled with the same
size paper, the machine automatically prints from tray 2
after the tray 1 runs out of paper.
This option does not appear if you selected Auto
for Paper Source from printer driver.
Automatically substitutes the printer driver's paper size
to prevent the paper mismatch between Letter and A4.
Paper Substit.
For example, if you have A4 paper in the tray but you set
Paper Substitution
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
Determine whether to disregard the paper mismatch
Paper Mismatch
error or not. Select Off, then the machine does not stop
printing even if the paper mismatches.
Description
195
3. Useful Setting Menus

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents