Repotec RP-WR5441L User Manual page 9

Step 1 connecting your computer to the LAN port.
Attach one end of the Ethernet cable with RJ-45 connector to your hub, switch or a computer's
Ethernet port, and the other end to one of the LAN ports of your Wireless 802.11b/g/n
150Mbps Broadband Router.
Step 2 Connecting Cable/ADSL Modem to the WAN port.
Connect the Ethernet cable attaching to your Cable/ADSL modem to the WAN port of your
Wireless 802.11b/g/n 150Mbps Broadband Router.
Step 3 connecting the power adapter.
Connect the single DC output connector of the power adapter to the power jack on the side of
the Wireless 802.11b/g/n 150Mbps Broadband Router. Then plug the Power Adapter into an
AC outlet.
Step 4 Power on the following devices in this order:
Cable/ADSL modem, Router, and PCs
Wireless 802.11b/g/n 150Mbps Broadband Router User Manual
Figure 2-2
8